Mimaki Flatbed CF3 Plotter/Cutter

Suitable Cutting Materials

Suitable materials for the CF3 Series are:

Aluminium

Polyacrylic

plexiglas

PVC

Foam Board

Wood

Corrugated fibreboard

Vinyl Chloride shet

Reflective Sheets

Sandblast Rubber

Industrial Sheet Rubber (3mm max)

Pattern Happort

Vinyl

As materials can differ depending on the manufacturer, the suitability of the material should be first tested.

Powerful Mimaki Software Included

The Mimaki CF3 Flatbed Cutter is supplied with the high performance cutting software - Mimaki Plotter Assistant and FineCut7.

Cutting data is created with FineCut7. The cutting conditions are then set up and the status of the plotter is monitored with the Plotter Assistant Software.

Together the software applications enable full utilisation of the capabilities of the Mimaki CF3 Series.

[Note: Illustrator & Corel Draw are not available at Bi-Wize]

FlexiSign & VinylMaster Pro Software, available at Bi-Wize are great compliments for all cutting plotters.

:: THREE MODELS :: MULTIFUNCTIONAL :: VERSATILE ::

[CF3 Brochure & Specifications]
The CF3 Series incorporates three interchangeable head types ( Router Head, Tangential Head and Reciprocating Head ) which allows for cutting a wide range of materials.
Switching heads can be done relatively quickly.
Other tools such as Swivel Cutter, Pen Tool and creasing tool add to the strength and versatility of the Mimaki Flatbed CF3 Series.

Supports both small and large size media up to 1.6m x 3.1m (63" x 122"). Even difficult acrylic or aluminium composite panels can be cut with consistently high accuracy. User exchangeable cutting heads to suit a wide range of conditions widen your possibilities greatly.

THREE MODELS : ROUTER MODEL (M HEAD)

Rigid materials such as Acrylic & Aluminium can be cut with a high speed spindle. The Router Model is especially suitable to cut rigid and thicker materials.

The cut depth control function enables multiple cuts for especially thick materials.

Specifications:
Spindle Speed: 60,000 rpm
Max Tool Diameter: 6mm
Tool Chuck / Clamp System: Collet type
Max Cutting Depth: 5 cm (material dependant)

Router head on Mimaki CF3 Flatbed Cutter

.......... CF3 Flatbed Cutter with Router head

Spindle speed	60,000rpm
Tool chuck	collet type
Maximum tool diameter	6mm (0.24")
Main materials	rigid materials such as acrylic and aluminium composite panels
Set tool	endmill

THREE MODELS : TANGENTIAL MODEL (R1 HEAD)

The Tangential cutter steers the blade as it cuts. The motor controlled blade lifts and turns to start every cut at the exact angle. Both half and die cutting is possible. Various materials ranging from soft to ridged can be cut. The cutting capabilities and cutting depth depend on the type of material. Any suitable blade available in the market can be mounted.

Max reciprocating speed	approximately 10,000 strokes/min
Stroke	1mm *dependent on the cutter and holder used
Maximum cut depth	20mm *dependent on the cutter and holder used
Main materials	cardboard, corrugated board, foam material
Set tool	swivel cutter/pen, reciprocating cutter creasing tool, high-pressure tangential cutter

THREE MODELS : RECIPROCATING MODEL (TF2 HEAD)

A reciprocating cutting system is characterised by the up-and-down movement of the cutter blade in addition to tangential cutting. The reciprocating cutter is especially suitable to cut corrugated board, cardboard and foam materials.

Creasing tools are available to produce creases in cardboards and corrugated boards. You can also cut materials that can be cut with the tangential model.

Vertical tool force	low-pressure head:300-1,500, high-pressure head:1,000-5,000g
Main materials	reflective sheet, rubber, industrial materials
Set tool	swivel cutter/pen, tangential cutter creasing tool and high-pressure tangential cutter

COLOUR PHOTO SENSOR

The patented Mimaki Colour Photo Sensor on CF3 reads registration marks (

)that are printed on the media to obtain more precision by automatic correction of alignment & distances.
:: Sensor :: By recognising the difference between the colour of the media & of the registration marks (

), the position of the registration marks is correctly detected regardless of the colour of the media.
:: Light Pointer :: The registration marks (

)can be located easily and can be used to precisely position the media on the bad.
:: 4-point adjustment :: By detecting 4 registration marks & adjusting alignment & distance, precise contour cutting of complex shapes is enhanced.

MEDIA IS FIRMLY HELD BY VACUUM SYSTEM

The reverse cycle Vacuum System is divided into zones, 6 for the CF3-1631 and 2 for the CF3-1610. These zones can be separately activated to suit the media size for optimal media hold. The blower function ( reversing the air stream) can be activated to easily position and replace heavy media.

AUTOMATIC CLEANING OF THE TABLE SURFACE

Ensuring that dust and media particles are removed from the surface of the table is vital in the smooth precision cutting of the Mimaki CF3 when the Router Head ( M Head) is used. The automatic cleaning function selects the area to be cleaned from a total of 8 sections.

Applications

The Mimaki Flatbed CF3 Cutter Series can cut all kinds of industrial products!

operation panels

buttons

ID Cards

packaging materials

fashion accessories (belts)

toys

Printed Circuit Boards

AND ... lots of SIGNAGE
from small to large items and thin to thick materials, including

3d logos

thick robust signs

large POP displays and display materials.

The list of possible applications is limited only to your imagination!

Effective Print & Cut Combo

The Mimaki CF3 Series is available in 2 sizes- CF3-1631 & CF3-1610, which are the same as the JF Series.

Mimaki CF3 & JF Series therefore deliver a true print and cut workflow The combination is the ideal cutting solution for small runs of industrial production and for all kinds of signage.

CF3-1610 Vacuum

Displays the 2 vacuum sections on the CF3-1610

CF3-1631 Vacuum

The larger flatbed area utilises the 6 vacuum sections on the CF3-1631