Description
Specifications
K Series Skimming Tools:
KA2.32.30.127
Size: Diameter 32mm, Length 30mm, Shank 12.7mm
Description: Two-Flute end-mill cutter with large diameter.
Application: Ideal for skimming sacrificial sheets on CNC routers or surface skimming any surface.
Materials: MDF – Softwoods
M Series Two Flute Straight Bits:
MA2.15.5.32
Size: Diameter 1.5mm, Cut 5mm, Shank 3.2mm
Description: Solid carbide two flute straight edge cutter.
Application: Designed for cutting MDF, plywood and foam. The two flute design produces a sharp edge to products like MDF which may be prone to furry edges when using spiral bits.
Materials: MDF – Plywood – Foam – Multi-layer Board
MA2.32.17.32
Size: Diameter 3.2mm, Cut 17mm, Shank 3.2mm
Description: Solid carbide two flute straight edge cutter.
Application: Designed for cutting MDF, plywood and foam. The two flute design produces a sharp edge to products like MDF which may be prone to furry edges when using spiral bits.
Materials: MDF – Plywood – Foam – Multi-layer Board
MA2.6.22.6
Size: Diameter 6mm, Cut 22mm, Shank 6mm
Description: Solid carbide two flute straight edge cutter.
Application: Designed for cutting MDF, plywood and foam. The two flute design produces a sharp edge to products like MDF which may be prone to furry edges when using spiral bits.
Materials: MDF – Plywood – Foam – Multi-layer Board
TA Series Up/Down Spiral:
TA.32.127.32
Size: Diameter 3.2mm, Cut 12.7mm, Shank 3.2mm
Description: Two flute end mill cutter
Application: Designed to give an exceptional finish on perspex and acrylic materials.
Materials: Acrylic – Foamex – PVC – Corflute – Softwoods – AluComp
TA.32.254.32
Size: Diameter 3.2mm, Cut 25.4mm, Shank 3.2mm
Description: Two flute end mill cutter
Application: Designed to give an exceptional finish on perspex and acrylic materials.
Materials: Acrylic – Foamex – PVC – Corflute – Softwoods – AluComp
TS.63.254.63
Size: Diameter 6.3mm, Cut 25.4mm, Shank 6.3mm
Description: Two flute end mill cutter
Application: Designed to give an exceptional finish on perspex and acrylic materials.
Materials: Acrylic – Foamex – PVC – Corflute – Softwoods – AluComp
TA.63.508.63
Size: Diameter 6.3mm, Cut 50.8mm, Shank 6.3mm
Description: Two flute end mill cutter
Application: Designed to give an exceptional finish on perspex and acrylic materials.
Materials: Acrylic – Foamex – PVC – Corflute – Softwoods – AluComp
TA.DS.32.127.32
Size: Diameter 3.2mm, Cut 12.7mm, Shank 3.2mm
Description: Two flute end mill cutter (Down Spiral)
Application: Designed to give an exceptional finish on perspex and acrylic materials.
Materials: Acrylic – Foamex – PVC – Corflute – Softwoods – AluComp
TA1.32.127.32
Size: Diameter 3.2mm, Cut 12.7mm, Shank 3.2mm
Description: 1 Up Spiral
Application: Designed to give an exceptional finish on perspex and acrylic materials.
Materials: Acrylic, Plastic. Gives a polished edge.
TA2.63.51.63
Size: Diameter 6.3mm, Cut 51mm, Shank 6.3mm
Description: Straight Bit
Materials: MDF, Plywood, Foam, Multilayer Board
TA Series V Groove:
TA.V.63.8.63
Size: Diameter 19mm, Cut 8mm, Shank 6.3mm, Angle 90 Degrees
Description: Flat point V groove bit
Application: For grooving AluComp for folding
Materials: Alucomp
U Series Single Flute:
UA1.32.6.32
Size: Diameter 3.2mm, Cut 6mm, Shank 3.2mm
Description: Solid carbide single flute end mill cutter.
Application: Designed for use on both aluminium and aluminium composite material. The single flute design gives excellent swarf clearance, combined with a short cutting length for strength. Best results in aluminium are achieved when combined with a coolant atomiser.
Materials: Aluminium – AluComp– Alloys – Brass
Y Series Single Flute:
YA1.32.12.32
Size: Diameter 3.2mm, Cut 12mm, Shank 3.2mm
Description: Solid carbide single flute end mill cutter
Application: Designed to give an exceptional finish on perspex and acrylic materials, in many cases eliminating the need for flame polishing components after cutting. This range of tools also offers exceptional surface finish on Foamex, corflute and similar materials.
Materials: Acrylic – Foamex – PVC – Corflute – Softwoods
YA1.6.22.6
Size: Diameter 6mm, Cut 22mm, Shank 6mm
Description: Solid carbide single flute end mill cutter
Application: Designed to give an exceptional finish on perspex and acrylic materials, in many cases eliminating the need for flame polishing components after cutting. This range of tools also offers exceptional surface finish on Foamex, corflute and similar materials.
Materials: Acrylic – Foamex – PVC – Corflute – Softwoods
