|Print head||On-demand piezo head (2 staggered layout)|
|Print resolution||300, 600, 900, 1200 dpi|
|Print gap||By manual 3 levels (3.0/3.5/4.0 mm)|
|Ink||Type/Color||Sublimation ink Sb411 (Bl, M, Y, K, Lbl, Lm, Lk), Sb410 (Fp, Fy)|
|Capacity||2L Ink pack / 10 kg Ink tank *1|
|Maximum print width||1,610 mm (63.4″)|
|Media||Maximum width||1,620 mm (63.8″)|
|Thickness||1 mm or lower|
|Roll diameter||φ250 mm or less|
|Roll weight||45 kg or less|
|Roll inside diameter||2 inch / 3 inch|
|Media cutting||Auto cutting by cutter of head unit *2|
|Interface||Ethernet 1000 BASE-T / (USB2.0 Hi-speed)|
|Certifications||VCCI class A, FCC class A, ETL IEC 62368-1,
CE Marking (EMC, Low voltage, Machinery directive, and RoHS),
CB, REACH, Energy Star, RCM, EAC, KC, UKCA
|Power supply||Single-phase AC100-120 / 200-240V±10%, 50/60Hz±1Hz|
|Power consumption||Max.: 1,440 W or less / Standard: 800 W|
|Operational environment||Temperature: 20–30 °C (68–86 °F)
Humidity: 35–65% Rh (Non condensing)
Recommended temperature: 20–25 °C (68–77 °F)
Dust level: General office level
|Dimensions (W×D×H)||3,170 x 820 x 1,305 mm (124.8 x 32.3 x 51.4″)|
|Weight||240 kg (529.1 lb)|
*1 Lbl, Lm, Lk, Fp, Fy are only available in 2L ink packs and can be used with 10kg ink tanks.
*2 Cut shape can be V-shaped cut or straight cut.
|Sb411+Sb410 Fp Fy
|Bl M Y K|
|Bl M Y K Fp Fy|
|Bl M Y K Lbl Lm|
|Bl M Y K Lbl Lm Lk|
|Bl M Y K Lbl Lm Fp Fy|
- Some of the samples in this website are artificial renderings.
- Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
- The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
- Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.
- Depending on image files used for printing, the print quality would be affected when printing in a low-resolution mode with the lowest number of passes.